No Product Add in Cart
Marabu® ClearShield® Anti-Graffiti 2018 is a two-part anti-graffiti coating. It provides a clear, protective, chemical-resistant coating against aerosol paints, latex paints, and polishes. Additionally, it protects against UV fading, dust, and scratching. This liquid clear coat is ideal for signage and media in high traffic areas. ClearShield® Anti-Graffiti can be applied to nearly all substrates and surfaces including vinyl, banner, and water-resistant canvas. This product is compatible with solvent prints and cut vinyl graphics; not suitable for latex, eco-solvent, UV curable, or water-based ink printed graphics.
Mix Part A and Part B in a 32:1 ratio as listed on the bottle and described below. Apply with brushes, rollers, or a spray gun.
Part A | Part B Required |
1 qt | 1 oz |
1 gal | 4 oz |
CS-ANTIGRAF-G-GAL |
Data sheet
Formulation | Water-based, highly chemical-resistant liquid laminate with UV-inhibitors and HALS (hindered amine light stabilizers) |
Available Sizes | 4 oz, 16 oz |
Recom. Applications | For protecting all manner of surfaces and substrates against permanent ink defacing; also protects against UV fading, abrasion, and contamination. |
Colour(s) and Finish | Clear | Gloss |
Print Compatibility | Compatible with true solvent inks only |
Installation | Hand brush, roller, or spray gun capable |
Notice | Not recommended for use with eco-solvent, latex, UV-curable, or water-based inks |
Specific References
Error
- Prevents permanent graffiti damage
- Two components, mixing required
- Waterproof
- Guards against permanent graffiti
- Resistant to UV rays, salt spray, dirt, humidity, and abrasion
- 1 mil polyester
- 3 year durability
- High viscosity
- For hand application
- UV protection
- More economical than laminating films
- Water-based
- Protects against permanent graffiti
- Inks and paints wipe off
- Highly flexible
- Water-based
- Remember to buy both Part A & Part B (in drop down menu)