1-800-461-1722
All Categories
Cart
(0)
No Product Add in Cart
AP3155 is an adhesion promoter for use with UV and LED curable inks when printing on hard-to-print substrates including glass, metal, aluminum, and acrylics. This product is also suitable for use on HDPE, Coroplast, and polystyrene.
Application Instructions
- Wear protective gear including latex or nitrile gloves and safety glasses
- Use in a well ventilated area
- Apply AP3155 to the substrate with a clean, white, lint free wipe or microfiber cloth saturated with the promoter, covering the full surface and ensuring no voids
- Using a clean, dry, white lint free wipe or microfiber cloth, wipe off AP3155, leaving a thin layer of promoter on the substrate (the substrate will feel slippery)
- Load the AP3155 prepared substrate into the printer and print image using UV or LED curable ink
- AP3155 will cure with the ink when flashed by the UV or LED lamp
Special Instructions for Glass
- When printing on glass only print on the float or tin side of the glass
- To confirm the float or tin side, illuminate the glass with a black light: the float or tin side of the glass will glow
ADHPROUV-AP3155L |
Specific References
Related Products
- Ink adhesion promoter
- For Coroplast, polystyrene PVC, HDPE
- For use with UV and LED curable inks
- 1 L
Price
CA$87.60