AlbaChem® APPLY in an application fluid for vinyl films. It floats the graphic during installation. This helps position the graphic and results in fewer air bubbles. Application fluid also improves adhesion. AlbaChem® APPLY is most useful for applying large graphics. It's suitable for use on cars, glass, metal, corrugated plastic, and other smooth, flat surfaces. APPLY can be used to clean substrates too. It has low odour.

Directions:

1. Clean substrate thoroughly with APPLY and lint free cloth or paper towel.
2. Spray substrate with APPLY, peel off liner, and position graphic.
3. Once graphics are perfectly positioned, tape in place (if desired), then squeegee out liquid. Work from the center outward using a good deal of pressure.
4. Wait a couple of minutes and spray cover tape (if any) with APPLY and remove.
5. Wipe down with clean paper towel.

MSDS for AlbaChem® APPLY

Technical Data Sheet